R Electrical Solutions Ltd logo
Victorian red-brick brewery buildings and chimney beside the River Trent in Burton upon Trent

Burton upon Trent, Staffordshire

Smart Home AutomationAnd Electrical ContractingIn Burton Upon Trent

A brewing town with serious industrial infrastructure and a wide spread of housing. Our control panel and process background makes Burton one of the areas where both halves of the business get used.

Book Your Free Consultation07970 285567

Free initial consultation at your Burton property or site — no obligation, no sales script.

  • 16+ years

    Domestic, commercial and industrial experience

  • Full Scope

    NAPIT registered for all aspects of electrical work

  • 6-year

    NAPIT-backed workmanship guarantee on qualifying installs

  • £10m

    Public and employers' liability cover

  • Free

    Initial consultation, no obligation

Working in Burton upon Trent

Domestic work in the town, control work on the estates

Burton upon Trent is a straight run south-west from Derby on the A38, and one of the few areas we cover where industrial work is as likely as domestic. The town's brewing heritage left behind a large stock of production buildings, warehousing and light industrial units, alongside Victorian terraces, inter-war semis and modern estates at Stretton, Branston and Winshill.

Ross Hutchinson's background includes building and commissioning bespoke food-handling control systems, working on production lines and control panels on sites worldwide. In a town built on process plant, that experience is directly relevant — reading a panel schedule, diagnosing a control fault and putting a BMS back under proper control are the same skills whether the product is beer or anything else.

Burton's residential stock is broad. The terraced streets close to the centre are late Victorian, often with solid walls and cellars, and many have been through decades of partial electrical modification. Horninglow, Winshill and Stapenhill add inter-war and post-war housing, while Stretton and Branston bring newer estate homes where the interest is usually EV charging, security, network coverage and heating control rather than a full rewire.

The commercial and industrial side is where Burton differs from most of our patch. Warehousing, distribution and food and drink production sites need three-phase work, control panels, emergency lighting, periodic inspection and building management systems that behave. We can produce RAMS for any project and carry £10m public and employers' liability, which is what those sites ask for before granting access.

Flooding and river proximity also shape work here. Parts of Burton sit close to the Trent and have a documented flood history, which affects where equipment is mounted, how ground-floor and cellar circuits are protected and separated, and whether critical distribution belongs at low level at all. It is a genuine design consideration rather than a footnote.

Victorian terraces and cellars

Solid-wall properties near the town centre with cellars, awkward stair positions and decades of piecemeal electrical alterations behind the plaster.

Inter-war and post-war suburbs

Horninglow, Winshill and Stapenhill housing that is typically due a consumer unit upgrade, additional circuits or a full rewire before anything else is added.

Modern estate housing

Stretton, Branston and the newer developments, where the work is usually EV charging, garden power, security and making the network reach the whole house.

Industrial and production units

Brewing, food and drink, warehousing and distribution premises needing control panels, three-phase work, emergency lighting and BMS commissioning.

Getting to Burton upon Trent

Burton is a direct A38 run south-west from our Derby base, one of the quicker journeys we make out of the county and a route we travel regularly. That keeps survey visits, staged install days and return commissioning trips straightforward to schedule for both domestic and site work.

What we get asked for here

  • Control panel work and production-line electrical support
  • BMS design and commissioning on Loxone, Trend, KNX and Schneider
  • Periodic inspection, EICRs and emergency lighting testing
  • Rewires and consumer unit upgrades in older terraced housing
  • EV charge points at homes and workplaces with load management
  • CCTV and access control for industrial and warehouse premises

Services in Burton upon Trent

Everything we install for Burton upon Trent clients

The full domestic, commercial and industrial service range is available across Burton upon Trent, delivered under NAPIT Full Scope registration with RAMS on request for site work.

Why Burton upon Trent clients call us

Why choose us in Burton upon Trent

Real industrial experience

Bespoke food-handling control systems, control panels and production-line commissioning on sites worldwide. In a process town that experience is the difference between diagnosing a fault and guessing at it.

One contractor, three sectors

Domestic, commercial and industrial work from the same business, so a factory owner's house and their production line can be handled by people who already know both.

Site documentation ready

£10m public liability, £10m employers' liability, £1m professional indemnity and RAMS issued for any project — the paperwork Burton's larger sites require up front.

NAPIT Full Scope registration

Registered across all aspects of electrical work, with certification issued properly and Building Regulations notification handled where it applies.

Official Loxone Partner

Partner-listed for Loxone with Trend, KNX and Schneider also within scope, so a control strategy is chosen on merit rather than on what we happen to stock.

6-year workmanship guarantee

NAPIT-backed 6-year guarantee on qualifying installations, minimum 1 year elsewhere, with maintenance packages available afterwards.

Local conditions

Burton conditions we design around

A river town with heavy industry and a lot of pre-war housing has a particular risk profile. These are the issues that shape our designs here.

Flood risk and low-level equipment

Parts of Burton sit close to the Trent with a known flood history. Consumer units, controllers and distribution equipment mounted at low level in cellars or ground-floor utility rooms are a bad idea in those locations. Where the risk exists we raise equipment, separate ground-floor circuits and design so a wet week does not become a rewire.

Industrial environments that punish standard kit

Production areas bring washdown, steam, dust, vibration and temperature swings. Standard accessories and enclosures fail early in those conditions. Correct IP rating, gland selection and cable specification are chosen for the environment rather than the price list.

Undocumented control systems

Many Burton sites run building and process control installed years ago by contractors who have moved on, with no strategy documentation and nobody left who understands it. Plant fights itself, energy is wasted and faults take days to trace. We document what is there before changing it.

Terraces wired for a different era

Victorian and inter-war housing in the town centre often runs on installations extended one spur at a time. Mixed cable types, missing circuit separation and no board schedule are common findings. An EICR turns that guesswork into a prioritised plan.

How the job runs

The same five steps on every Burton upon Trent job

  1. 01

    Free initial consultation

    We come to the property, walk it room by room, and listen to how you actually live or trade in the building before anyone talks about kit.

  2. 02

    Design (chargeable)

    Once you decide to progress, we produce the design — schematics, cable routes and control strategy — so nothing is invented on site later.

  3. 03

    First fix

    Containment, cabling and back boxes go in while the building is open, on a staged payment tied to that milestone.

  4. 04

    Second fix and commissioning

    Accessories, panels and controllers are fitted, then programmed, tested and certified to BS 7671 before anyone signs anything off.

  5. 05

    Handover and aftercare

    You get a walkthrough, the certification pack and the choice of a remote or in-person maintenance package to keep the system right.

Before you enquire

Burton upon Trent questions, answered straight

Do you serve Burton upon Trent?

Yes. Burton is a direct A38 run from our Derby base and a regular area for us, covering the town plus Stretton, Branston, Winshill and Stapenhill.

How fast can you reach Burton?

It is one of the quicker journeys we make out of Derbyshire and a route we travel often, so both domestic consultations and site visits are easy to book at a firm time.

What does the work cost in Burton?

We quote per project rather than publishing prices, because a terrace rewire and a control panel build have nothing in common. The initial consultation is free and a written quotation comes first.

Do you offer emergency call-outs in Burton?

Emergency and out-of-hours support is available on request, and it is most commonly used by our commercial and industrial clients. Call and we will tell you what is realistic.

Can you work on production and process equipment?

Yes. Control panel construction and production-line commissioning, including bespoke food-handling systems, is a core part of our background rather than an occasional sideline.

Do you provide RAMS for Burton sites?

Yes, for any project on request, alongside £10m public liability, £10m employers' liability and £1m professional indemnity cover.

Can you take on a BMS installed by someone else?

Yes. Inherited Loxone, Trend, KNX and Schneider systems are regular work. We document the existing strategy, correct what is conflicting and leave you something maintainable.

Do you install EV chargers for Burton businesses?

Yes, workplace and fleet charging as well as domestic, with supply assessment and load management so charging does not compromise the rest of the site.

Which nearby areas do you cover?

Derby, Ashbourne, Long Eaton, Ilkeston and the wider East Midlands, with Burton sitting on our western edge.

What guarantee applies to Burton work?

A NAPIT-backed 6-year workmanship guarantee on qualifying installations and a minimum 1-year guarantee on other work, with maintenance packages available.

Nearby areas we cover

Keep reading

Browse the full services list, read more about the company, return to the homepage or get in touch about a project in Burton upon Trent, Staffordshire.

Exterior building signage illuminated with colour-changing LED lighting installed by R Electrical Solutions

Planning a project in Burton upon Trent?

Home, office or production floor — book a free consultation and we will look at what you have before recommending anything.

Request Your Free Consultation07970 285567

NAPIT Full Scope · Official Loxone Partner · 6-year workmanship guarantee on qualifying installations · £10m public liability

Call NowGet an Estimate